Remeha Avanta Plus ENER_G CHP Informations techniques Page 5

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 15
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 4
9
REMEHA ENER-G10 TECHNICAL SPECIFICATION
REMEHA ENERG10 TECHNICAL SPECIFICATION
8
Boiler Model ENERG10
Product Code CP10WE
Dimensions W x D x H mm 1470 x 800 (900 including protrusion) x 1790
Net Weight kg 790 (including cooling water and lubricant)
Rated Output kW 10.00*
1
Frequency Hz 50
Voltage V AC400
Current A 14
Phase/Wires Three phase, four wires
Power Factor % 97 or more
Recovered Heat kW 17.3
Hot Water Temperature
Inlet °C 65
Outlet °C 70 (Max 78)
Hot Water Flow Rate L/min 48.2*
2
Overall Efficiency % 84.0
Electrical Generation Efficiency % 30.7
Exhaust Heat Recovery Ratio % 53.3
For Rated Load
Radiator Fan Stopped dB (A) 54
Radiator Fan Operating dB (A) 56
dB (A)
Voltage ACV 230
Startup Current A 22.6 (average electric current)
Power Consumption (Rated)
Radiator Fan Stopped kW 0.28
Radiator Fan Operating kW 0.53
Space Heater (below 5°C) dB (A) 0.50 (for cold regions)
Fuel Consumption (LHV basis) kW 32.6*
3
Gas Supply Pressure
Category 2H mbar 20
ENERG10
1 The heat recovery and efciency values are those for rated output in standard atmospheric conditions.
2 The operating sound levels are maximum values measured in 4 directions at a point 1m from the side of the unit and 1.2m above the ground in an anechoic room simulation.
The sound levels during actual operation are usually higher than the simulated values due to ambient noise and echoes.
3 The values for the external dimensions do not include piping, piping connections, or protruding parts.
4 The amount of fuel consumption is based on lower calorific values.
5 As for G83, the examination was carried out by New and Renewable Energy Centre (NaREC) in U.K.
*1 Power consumption is included
*2 Max of +5%; 50.6l/min
*3 Tolerance +5% is not included
GAS ENGINE UNIT
Vue de la page 4
1 2 3 4 5 6 7 8 9 10 ... 14 15

Commentaires sur ces manuels

Pas de commentaire